Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Elk Grove, CA | Mortons Air Duct Sacramento
We clean and repair Lennox ductwork across Elk Grove as an independent service provider, not a factory-authorized shop. The short version: most Lennox owners in Elk Grove don’t actually need new equipment, they need the ducts and coils those systems push air through to be cleaned and sealed properly. A dust-choked A-coil or a kinked flex run off a CBX25UH supply plenum will make even a well-built Lennox furnace work harder than it should. Call (279) 239-4171 for a written estimate, and we’ll tell you exactly what we’ll do before any work starts.
We know Lennox systems the way only independent technicians can. We’re not tied to factory warranty work, so we focus on what actually matters for your home: the ductwork that carries the air, the evaporator coils that cool it, and the return paths that feed it. We cover every neighborhood in Elk Grove, from Laguna West to the older ranch homes near Elk Grove Creek. For Lennox sales & service guidance or duct hygiene work, we’re one call away.
Why Elk Grove Residents Choose Us for Lennox Service
Paul Adeyemi, our owner, learned HVAC through the sheet metal and air distribution program at Los Angeles Trade-Technical College. That training focused on the movement of air through a building, not just the equipment generating it. It’s why we approach every Lennox job in Elk Grove by looking at the full path air travels: return grille, return duct, filter, blower, supply plenum, supply runs, registers. When one part of that path is compromised, the whole system pays for it.
We arrive with shoe covers and drop cloths on every visit, protect pet areas while the equipment runs, and we keep the noise down if a toddler is napping down the hall. We use professional gear from Rotobrush and Nikro, not entry-level rental equipment. And every job ends with a photo of the clean-up before the crew leaves. The 365-Day Done Right Promise is on every invoice: if it’s not right, we make it right.
As part of the Cedarwell family of independently owned companies, we follow the Cedarwell Care Promise. That means a live person answers our phone around the clock, the price is written down before work starts, and no one gets a surprise invoice. Our service area covers all of Elk Grove service area neighborhoods without exception.
Styles & brands we work with
Common Lennox Air Duct Cleaning Problems We Solve in Elk Grove
- Kinked flex duct off CBX25UH supply plenums. Post-1990 tract homes in Elk Grove typically use builder-installed flex duct. Attic spaces are tight, and we frequently find supply runs bent at harsh angles where they leave the plenum. A kinked run starves a bedroom of airflow and forces the ECM blower to work against static pressure it was never designed to handle.
- Dust-choked A-coils on Lennox furnaces. Elk Grove summers mean the AC runs from May to October. Pollen, field dust from surrounding farmland, and fine particulate from Tule fog in winter all get pulled into the system. When the A-coil loads up, the system runs longer, cools less, and the blower motor ages faster. We clean evaporator coils as part of our duct work.
- Rodent nesting in return boots on east-side ranch homes. Older homes near Elk Grove Creek often have original 1970s metal ductwork with open register boots. The mature trees and open crawlspaces in that area are a nesting magnet. We’ve removed nests from returns on original G26 furnace installs where airflow dropped to almost nothing every fall.
- Clogged secondary heat exchangers on EL296V furnaces. Years of unfiltered dust entering through unsealed return ducts eventually coats the secondary heat exchanger. This is a slow-burn problem: it reduces efficiency season over season until the furnace starts short-cycling or throwing limit codes.
- Collapsed flex runs in Laguna West subdivisions. The original 1990s Lennox flex duct in these attics was sometimes installed with undersized radius bends to fit tight truss spacing. We repair more kinked and collapsed supply runs per house in Laguna West than in any other Elk Grove subdivision.
Lennox Service in Elk Grove: What Local Conditions Mean for Your Equipment
Elk Grove’s growth since 2000 means entire streets share the same duct layouts. Builders put up tract after tract with near-identical floor plans, the same builder-grade flex duct, and the same undersized radius bends in the attic. If you live in a Laguna West or Lakeside home built during that run, your neighbor’s Lennox system is likely fighting the same airflow restrictions yours is. That’s not a coincidence. It’s the original installation, repeated hundreds of times over.
Last week our crew pulled the attic hatch on a stucco tract home in Laguna West and found a Lennox CBX25UH supply plenum with two collapsed flex ducts leading to the upstairs bedrooms. The tubing was kinked ninety degrees at a truss chord. Airflow was barely moving and dust was piling up at the register mouths. We cut out the crushed section, installed rigid elbows, re-insulated the repaired run, and vacuumed the entire duct system. Static pressure dropped back into spec and the homeowner said the upstairs finally cooled by 6 p.m. That’s the kind of repair this page is about: finding the restriction, fixing it, and letting the Lennox equipment do its job.
In the older east-side ranch homes near Elk Grove Creek, the problem is different. Those systems often still have original 1970s metal ducts with register boots that were never sealed against pests. The area’s big trees and open crawlspaces make it a rodent hotspot, and every fall we pull nests out of return paths that feed original G26 furnaces. Different neighborhood, different failure mode, same outcome: a Lennox furnace working too hard for air that can’t get through.
Lennox Models & Products We Service in Elk Grove
We work on the full Lennox residential line across Elk Grove. The Merit Series, with the CBX25UH air handler paired to an SL18XC1 condenser, is common in post-1990 tract homes and most of what we see for duct repairs. Elite Series systems, like the EL296V furnace with an XC16 condenser, show up in newer construction and larger floor plans. Signature Series equipment, including the SL280V furnace and XC21 condenser, is less common but we service it regularly. The older G26 and G32 furnaces still run in east-side ranch homes near Elk Grove Creek, and those systems often need return-side attention first.
For critical duct components like registers and boots, we default to OEM Lennox parts because the fit is exact. For non-structural parts like flex duct, mastic, or grilles, we use proven aftermarket equivalents that meet Lennox performance specs at a lower cost. We’ll also tell you honestly when a duct section can be repaired with sealing and insulation instead of replacement. Our goal is the right fix for your system, not the most expensive one.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Elk Grove
Air Duct Cleaning in Elk Grove for Lennox systems typically runs between $450 and $850 for a full system on a standard 2,500-square-foot tract home. Smaller homes or partial systems, like a single-zone clean with coil attention, sometimes land in the $300 to $450 range. Larger properties, or systems with multiple returns and extensive flex runs, can reach $900 to $1,300. What drives the number: total linear footage of ductwork, number of returns and supply runs, whether the evaporator coil needs cleaning, and whether we’re repairing kinks or sealing leaks as part of the visit. That’s why we always provide a written price before any work begins.
If you want an exact figure, call (279) 239-4171 and we’ll work up a written estimate for your home. No guessing, no upcharge after the van is in the driveway.
Serving Elk Grove, CA - Our Local Coverage Area
We’re based in the Elk Grove area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Elk Grove
Elk Grove’s long summer cooling season from May through October means your A-coil sees constant airflow for five to six months straight. Agricultural particulate from surrounding farmland mixes with pollen and dust, and if your return ducts are unsealed, some of that bypasses the filter entirely. The coil gets coated, airflow drops, and the blower runs longer. Regular coil cleaning as part of your duct maintenance cycle keeps the system cooling properly. Call (279) 239-4171 and we’ll tell you if your coil is part of the problem.
Older east-side ranch homes near Elk Grove Creek often have original 1970s metal ducts with register boots that were never sealed against pests. Rodents enter through the boots, build nests in the return path, and clog the airflow before it ever reaches the furnace. A G26 or G32 Lennox furnace fighting a blocked return will short-cycle and run inefficiently. We remove the nesting material, seal the boots, and clean the full duct path.
No. We’re an independent provider, not a factory-authorized shop, and cleaning your ductwork does not void a Lennox equipment warranty. OEM warranties cover manufacturing defects in equipment, not the condition of your ductwork. What can harm a system isrunning it with severely restricted airflow, which is what clogged ducts and coils cause. Cleaning restores airflow and helps the equipment operate the way it was designed to.
Continuous blower operation with poor cooling is often an airflow restriction problem, not a thermostat problem. A variable-speed ECM blower on an EL296V or SL280V will ramp up to overcome static pressure from dirty coils or kinked supply runs. It runs longer because it’s fighting the system. We test static pressure during our visits, and when flex runs are kinked or the coil is loaded, we find the restriction and eliminate it.
Not special cleaning, but you do need a technician who understands that variable-speed motors are more sensitive to static pressure than fixed-speed PSC motors. The cleaning approach is the same: mechanical agitation with Rotobrush equipment and negative-pressure extraction. What matters more is that we identify and fix the airflow restriction during the same visit. A clean duct system with a kinked supply run still won’t perform. Call (279) 239-4171 for an estimate on our Dryer Vent Cleaning in Elk Grove or your specific system.
Service Areas Near Elk Grove
We serve Elk Grove and the surrounding Sacramento County communities. If your Lennox system is in Carmichael, Folsom, or Citrus Heights, we cover those areas too. For neighbors to the north, we offer Lennox service in Sacramento and Lennox service in Roseville. Wherever you are in the region, the same written-price-first approach applies.
Book Your Lennox Service in Elk Grove Today
We tell you what we’ll do, we tell you what it costs, and then we do the work. If you’re ready to get your Lennox system breathing properly again, call (279) 239-4171 for a free written estimate. A live person answers, and we’ll schedule a time that works around your family’s routine.
Written by Paul Adeyemi, Owner at Mortons Air Duct Sacramento, serving Elk Grove since 2005.